Gorman-Rupp Industrial Pumps

PUMPS FOR INDUSTRY
The Gorman-Rupp Company has been manufacturing pumps for industry since 1933. You'll find Gorman-Rupp pumps operating in the most hostile industrial environments. They have an experienced staff of engineers dedicated to the design and construction of the most efficient and serviceable pumps in the industry. When you need a pump you can depend on, choose the industry leader, Gorman-Rupp.

Solids & Corrosive Liquids - T Series

Size: 3", 4", 6", 8", 10"

Materials of Construction:
Cast iron, 316 stainless steel, CD4MCu, Alloy 20

Max. Capacity: 3300 GPM

Max. Head: 130 feet

Solids: 3"

Gorman-Rupp T Series pumps are designed for economical, trouble-free operation in handling solids-laden
liquids and slurries. Pumps feature a large volute design which allows them to reprime automatically in a completely open system without need of suction or discharge check valves.

Solids & Corrosive Liquids - 10 Series

Size: 1 1/2", 2", 3", 4", 6"

Materials of Construction: Cast iron, bronze, 316 stainless steel, CD4MCu, Alloy 20, hastelloy

Max. Capacity: 1500 GPM

Max. Head: 100 feet

Solids: 3"

Gorman-Rupp 10 Series pumps are specifically designed for handling solids and corrosive liquids and slurries. They have only two moving parts, the impeller and shaft, so maintenance is minimal.

High-Efficiency Solids & Corrosive Liquids - U Series

Size: 3", 4", 6"

Materials of Construction: Cast iron, CD4MCu

Max. Capacity: 1450 GPM

Max. Head: 200 feet

Solids: 1 1/4"

U Series pumps are the most efficient self-priming pumps available. Multi-vane, open impeller is designed for high efficiency yet can still handle solids up to 1 1/4" in diameter.

Limited Solids & Mild Corrosive Liquids - 80 Series

Size: 1 1/4", 1 1/2", 2", 3", 4", 6", 8"

Materials of Construction: Cast iron, bronze (consult factory for other special metals available)

Max. Capacity: 2200 GPM

Max. Head: 205 feet

Solids: 2 3/8"

The 80 Series is a high-efficiency pump designed for non stop work loads. The simple design employs only two moving parts, so maintenance and service are minimal.

Corrosive Liquids & Limited Solids - 90 Series

Size: 2", 3"

Materials of Construction:
Cast iron, bronze, 316 stainless steel, CD4MCu

Max. Capacity: 310 GPM

Max. Head: 180 feet

Solids: 1/2"

90 Series pumps feature a compact design which makes them ideal for applications where space is critical or where several pumps must operate in close quarters.

Clear Liquids - O Series

Size: 2", 3", 4", 6"

Materials of Construction: Cast iron, aluminum, ductile iron

Max. Capacity: 1350 GPM

Max. Head: 390 feet

Solids: 5/8"

O Series pumps have a straight-in suction design which eliminates entrance restrictions and provides better suction performance when handling solvents and similar liquids.

Submersible Pumps - J Series/Axial Flow

Size: 3" to 12"

Materials of Construction: Cast iron

Max. Capacity: 9500 GPM

Max. Head: 265 feet

Solids: 5 1/2"

Horsepower: 3 to 174 HP

J Series semi-axial flow submersible pumps are specifically designed for handling solids. Depending on pump model, they will handle up to 5 1/2" diameter solids.

Submersible Pumps - J Series/Vortex

Size: 3", 4"

Materials of Construction: Cast iron

Max. Capacity: 650 GPM

Max. Head: 145 feet

Solids: 3"

Horsepower: 2 to 20 HP

J Series winglet vane vortex pumps are designed for pumping at high heads with low rates of flow. They won't clog or jam and will handle solids up to 3" in diameter.

High Volume, High Head - Widebase Submersibles

Size: 2" to 12"

Materials of Construction: Cast iron,
ductile iron, aluminum, stainless steel

Max. Capacity: 8500 GPM

Max. Head: 590 feet

Solids: 1"

Horsepower: 2 to 40 HP

Gorman-Rupp widebase submersible pumps are designed for high volume, high head applications.
Gorman-Rupp also offers compact slimline submersible and mine permissible pumps which are approved by the Mine Safety and Health Administration (MSHA) for operation in the United States.

High Volume, High Pressure - Standard Centrifugal

Sizes:
50 Series - 3" to 5"
60 Series - 3" to 12"
VG Series - 1 1/4" to 8"

Materials of Construction: Cast iron Cast iron Cast iron

Max. Capacity: 1200 GPM, 6800 GPM, 4800 GPM

Max. Head: 420 feet, 500 feet, 470 feet

Solids: 1 1/4", 3 1/4", 1 3/8"

Gorman-Rupp manufactures over 300 models of high volume, high pressure standard centrifugal pumps for general purpose industrial applications.

Return to Barrett Pump Home Page